C920-1836
Neuer Artikel
Each sold separately
The R1 900.6 marine-grade amplifier, made by Roswell, is everything your boats audio system has always wanted. Utilizing a 6-channel Class-D design that puts out 100 watts RMS per channel at 4Ω, these amps are perfect for powering your R1 8″ and R1 6.5″ in-boat speaker setup. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCB’s, and nickel-plated marine-grade wire terminals.
Continuous Power (RMS) | 4Ω: 100W x 6 |
---|---|
Bridged | 4Ω: 300W x 3 |
Frequency Response | 10-25 kHz |
Input Sensitivity | 0.2 – 10.0V |
HPF (High Pass Filter) | 30Hz – 300Hz |
LPF (Low Pass Filter) | 30Hz – 300Hz |
Bass EQ | 0 ~18dB @ 45Hz |
Dimensions | Inches: 1.90 x 7.0625 x 13.67 |
Nicht mehr lieferbar
Lieferdatum
Roswell R1 900.6 Amplifier
Each sold separately
The R1 900.6 marine-grade amplifier, made by Roswell, is everything your boats audio system has always wanted. Utilizing a 6-channel Class-D design that puts out 100 watts RMS per channel at 4Ω, these amps are perfect for powering your R1 8″ and R1 6.5″ in-boat speaker setup. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCB’s, and nickel-plated marine-grade wire terminals.
Continuous Power (RMS) | 4Ω: 100W x 6 |
---|---|
Bridged | 4Ω: 300W x 3 |
Frequency Response | 10-25 kHz |
Input Sensitivity | 0.2 – 10.0V |
HPF (High Pass Filter) | 30Hz – 300Hz |
LPF (Low Pass Filter) | 30Hz – 300Hz |
Bass EQ | 0 ~18dB @ 45Hz |
Dimensions | Inches: 1.90 x 7.0625 x 13.67 |
Empfänger :
* Pflichtfelder
oder Abbrechen