C920-1832
Neuer Artikel
Each sold separately
Roswell’s R1 550.2 is the ideal amp to run your R1 Tower Speaker setup. It’s a 2-channel Class-D design that puts out 100 watts RMS per channel at 4Ω. Featuring calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCB’s, and nickel-plated marine-grade wire terminals.
Continuous Power (RMS) | 4Ω: 165W x 2 |
---|---|
Bridged | 4Ω: 550W x 1 |
Frequency Response | 10-25 kHz |
Input Sensitivity | 0.2 – 10.0V |
HPF (High Pass Filter) | 30Hz – 300Hz |
LPF (Low Pass Filter) | 30Hz – 300Hz |
Bass EQ | 0 ~18dB @ 45Hz |
Subsonic Filter | 10Hz – 55kHz |
Phase Control | 0-180º |
Dimensions | Inches: 1.90 x 7.0625 x 11.125 |
Nicht mehr lieferbar
Lieferdatum
Roswell R1 550.2 Amplifier
Each sold separately
Roswell’s R1 550.2 is the ideal amp to run your R1 Tower Speaker setup. It’s a 2-channel Class-D design that puts out 100 watts RMS per channel at 4Ω. Featuring calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCB’s, and nickel-plated marine-grade wire terminals.
Continuous Power (RMS) | 4Ω: 165W x 2 |
---|---|
Bridged | 4Ω: 550W x 1 |
Frequency Response | 10-25 kHz |
Input Sensitivity | 0.2 – 10.0V |
HPF (High Pass Filter) | 30Hz – 300Hz |
LPF (Low Pass Filter) | 30Hz – 300Hz |
Bass EQ | 0 ~18dB @ 45Hz |
Subsonic Filter | 10Hz – 55kHz |
Phase Control | 0-180º |
Dimensions | Inches: 1.90 x 7.0625 x 11.125 |
Empfänger :
* Pflichtfelder
oder Abbrechen